Skip to content
Blog

Bosch Dishwasher Leaves Grit or Film: Separate Cleaning Mechanics From Water and Detergent

Bosch dishwasher leaving grit or film? Separate filter and spray arm problems from hard water and detergent, and learn when to call a technician.

Grit or a cloudy film on dishes after a Bosch wash usually comes from one of three places: food particles that the filter or spray arms failed to clear, hard water and detergent residue, or a load that blocks the spray. Work through them in that order, since each can look like the others.

Grit and film feel alike on a plate but have different causes. Grit is solid: it rubs off as sand or fine particles and tends to collect at the bottom of glasses. Film is a layer: it looks like a cloudy bloom and comes off with vinegar, or does not. Tell them apart before you change anything, because the fix is different.

Grit: look at the filter and the spray arms

If dishes come out with sandy particles, the wash water is carrying food back onto them. Open the lower tub and take out the filter assembly. Look for a ring of debris, a cracked mesh or a filter that is not fully twisted back into place. Rinse it under the tap and refit it. A filter that is slightly loose lets particles pass straight back into the circulation.

Spin each spray arm by hand and look into the nozzles. Seeds, pieces of label and bits of glass lodge there and cut the spray. If an arm does not turn freely, something is catching it. Then check that the large items in your load, such as baking trays, do not block the arm above them. Loading also matters on models with a third rack: the SHP78CM5N lists PowerControl targeting the lower rack, so stacking heavy pans in the wrong place defeats the design.

Film: water and detergent

A cloudy film that wipes off with a wet cloth is usually detergent residue or the minerals in hard water. If you recently changed detergent, try one without strong additives for a few cycles, and make sure the rinse aid compartment is not empty. In hard-water areas, a dishwasher that has a water softener function needs its salt kept topped up.

On heat pump models, limescale can build up inside the machine. Bosch lists E12 as limescale build-up in the heat pump and says the dishwasher needs descaling, using Bosch descaler and softening salt where there is a water softener function. That code is the clearest sign that mineral build-up has gone beyond the dishes. If you see it, stop troubleshooting for film and descale first.

What you see Likely side First thing to try
Sandy particles, mostly in glasses Filter or spray arms Clean the filter, check the nozzles
Cloudy bloom that wipes off Detergent or hard water Check rinse aid and salt
Chalky white crust inside the tub Scale Descale with a Bosch descaler
Dishes damp and spotted Drying Check the drying setting and rinse aid

Drying systems and spots

Spotting after the cycle can come from the drying design. The SHP78CM6N dries with CrystalDry technology, and the SPE53C55UC uses the PureDry system. The two work differently, so what you read online about drying may not apply to your model.

Owner checks that are safe

  • Run an empty cycle with nothing but a cup of white vinegar on the top rack and see if the film clears.
  • Clean the filter and check that it is seated properly.
  • Check each spray arm for blocked nozzles and free rotation.
  • Load with the dirty sides facing the spray and nothing nested.
  • Check the rinse aid level and the salt, if your model has a softener.

Where the checks stop

These checks cannot tell you whether water is reaching the right temperature, whether the circulation pump is moving the usual amount of water, or whether the diverter is sending water to both racks. Bosch lists E05 as a wash arm diverter circuit fault at the main control board, and the first check is a 30-second power reset at the breaker. A diverter that stops switching would leave one rack dirty and the other clean, which is a pattern worth noting.

What we test when dishes keep coming out dirty

A technician checks the circulation pump and spray pressure, the heating, and the diverter, and reads any stored fault. They look inside the tub for scale and test the inlet water. The Bosch dishwasher repair page covers the visit.

It helps to say which rack is worst, whether the problem is new, and whether it follows a detergent change. Give us the model and serial from the rating label too, and mention your water hardness if you know it.

FAQ

Need help with a Bosch appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Bosch appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 851-9513 Book a Repair