VERIFIED
Bosch range E106 is associated with door latch does not lock. Review symptoms, model details, and safe external checks before deciding on the next step.
If E106 appears on a Bosch range, the verified technical anchor is door latch does not lock. Similar Bosch product generations can differ internally, so preserve the model number and symptom sequence before resetting anything.
The guidance below remains at the owner-safe level. It focuses on recording the condition and checking accessible items without opening protected electrical, water, gas, refrigeration, or mechanical systems.
At a glance
- Code: E106
- Appliance: Bosch Range
- Verified meaning: door latch does not lock
- Primary diagnostic direction: the door, latch, or locking circuit
- Service-area context: San Francisco; confirm coverage by ZIP code
What the control is reporting
The verified technical anchor for E106 is door latch does not lock. Preserve that meaning in the factual layer. The warning points the diagnostic path toward the door, latch, or locking circuit, while the exact model and symptom pattern determine how that information should be applied.
What can happen while the code is active
Before changing settings or cycling power, note the behavior you can see or hear:
- The appliance may refuse to start.
- A cycle might stop unexpectedly.
- The door may remain locked or fail to lock.
- The control might not recognize the expected door position.
What may be causing it
The source record supports considering the following possibilities without treating any single one as confirmed:
- The door not reaching its expected position.
- A damaged latch, hook, or lock mechanism.
- A door sensor or switch fault.
- Wiring or electronic control failure in the interlock path.
What you can verify externally
- Confirm clothing, cookware, or another object is not preventing normal closure.
- Look over the visible latch area for obvious debris or physical damage.
- Avoid force a locked door and do not bypass the interlock.
These checks are intended to gather useful information without exposing live wiring, bypassing an interlock, defeating a leak-protection device, opening a sealed system, or using undocumented service modes.
When continued operation is not appropriate
Do not continue operating an appliance with a door that cannot latch securely or with a defeated safety interlock.
When external checks are no longer enough
A returning door code with normal external alignment requires testing of the lock/switch, wiring, and model-specific control path. Do not choose the most expensive module from the code alone. The technician should verify the relevant circuit or mechanism before recommending a repair.
For a service request, include what the appliance was doing immediately before the warning and which external checks were already completed.
Why the full Bosch model/E-Nr matters
Have the complete model/E-Nr with E106. That identifier helps separate platforms that may use different controls, sensors, or service logic.
FAQ
For this record, E106 is associated with door latch does not lock. The exact model/E-Nr still matters because Bosch can use different hardware and diagnostic logic across product families.
Only if no safety stop condition is present and the appliance is otherwise operating safely. If the code repeats, performance is abnormal, or there is leaking, smoke, electrical odor, sparking, overheating, or repeated breaker trips, leave the appliance off.
Use only a normal reset that Bosch documents for the exact model. If the warning returns, repeated resets are not a substitute for diagnosis.
No. The code identifies a detected system condition. Model information, symptoms, and model-specific testing are still needed before a component is selected.
Have the full Bosch model/E-Nr, the exact E106 display, the cycle stage or operating state where it appears, the visible symptoms, and the external checks already completed.
Bosch service in the San Francisco area
Need model-specific diagnosis for E106?
If E106 remains active or comes back, request Bosch range diagnosis for the San Francisco service area. Include the complete model/E-Nr, exact code, symptom summary, and ZIP code so service coverage can be confirmed.
Model compatibility: Bosch reuses codes across series and model years, so E106 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.