Source: Bosch US Owner Support - Refrigeration Error Codes
E03 is a fault in the dispenser user interface. Bosch says to reset power at the breaker for 30 seconds.
E03 on a Bosch refrigerator concerns the dispenser user interface. Bosch’s description is short: there is a fault or error in that interface. The user interface is the panel of buttons or touch controls you use to choose water or ice at the door dispenser.
At a glance
| Code | E03 |
|---|---|
| Appliance | Refrigerator |
| What it means | E03 on a Bosch refrigerator indicates a dispenser user interface fault or error. |
What you may notice
Bosch does not describe symptoms for E03. Since the fault is in the controls you press, it makes sense to note whether the dispenser buttons respond at all and whether the code appears as soon as you touch them. That detail is useful if you end up calling for service.
Bosch’s reset for E03
Bosch gives E03 the same first step as E02: reset the refrigerator’s power at the breaker. Turn the breaker off, count 30 seconds, and turn it back on. Then look at the display again.
If the short reset does not help, Bosch’s refrigeration page has a general routine for messages that begin with E or D:
- Switch off the appliance.
- Disconnect it from power, either by unplugging it or by switching off the circuit breaker in the fuse box.
- Reconnect after five minutes.
- If the message is still displayed, book a technician.
Food stays cold for a short power break as long as the doors stay shut.
When a reset is not enough
Bosch’s only listed remedy for E03 is the power reset. If the fault remains, the dispenser interface needs to be looked at by service. Avoid prying at the dispenser panel; it is wired into the door.
Codes on the same refrigerator page
- E02: icemaker fault or a communication issue in the ice and water controls
San Francisco Bosch fridge repair
Call (415) 851-9513 if E03 stays after both resets. Tell us the model number and which dispenser functions still work.