Skip to content
Model Reference

Bosch HGF1050MUC Gas Slide-in Range

Burners that will not light and ovens that drift off temperature are the usual calls for this slide-in gas range.

Model number HGF1050MUC
Appliance category Range
About this model

Model overview

A gas slide-in from Bosch, the HGF1050MUC pairs a storage drawer with five sealed gas burners and a 5.8 cu. ft. oven, and the cooktop reaches a combined 47,200 BTU on natural gas or LP. Its Air Fry mode and self-clean options of two, three or five hours make it a flexible range for weekday cooking. Households in San Francisco and the Bay Area can describe a fault by naming the burner or the oven function involved. The controls and oven light draw power from a 120 V, 60 Hz supply. Describe the symptom and the burner that acts up, copy the model number exactly as the rating label prints it, and list any code on the display.

At a glance

Model HGF1050MUC
Appliance 30-inch gas slide-in range
Common symptoms control panel or knob problems; convection fan or oven light not working; oven not reaching or holding temperature; burner will not ignite or keeps clicking
What you can check Note whether the problem is on the cooktop, the oven, or both, and the fuel type.
When to call a technician If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit.

Specifications

Dimensions Overall width is 29 7/8 inches.
Capacity Oven cavity capacity is 5.8 cu. ft.
Power The electrical supply is 120 V at 60 Hz. Total cooktop output is 47,200 BTU on natural gas or LP.
Features Five sealed gas burners are provided. A storage drawer is provided. Air Fry is an available cooking mode. The grates are cast iron.
Care The oven offers self-clean cycles of two, three or five hours.

What sets the HGF1050MUC apart

A drawer under the cooking area, five sealed burners and cast iron grates are the layout most cooks check first. The Air Fry mode is what distinguishes this range from a basic gas model, and the cast iron grates hold heavy cookware steady over each flame.

Service notes for the HGF1050MUC

When a burner refuses to light, the technician works from the igniter and its spacing back to the gas valve, and the owner must shut off the gas before touching the burner head. An oven that misses its set temperature is checked at the bake sensor and the element, while a silent convection fan or a dark oven light points to the motor and the socket. Control knobs that feel loose usually trace back to the switch assembly behind the panel. The owner can safely clean the burner ports, dry the caps and seat each cap flat. A gas smell means leaving the kitchen and calling the gas utility from outside. Note whether the clicking comes from one burner or all five.

The model number is printed on the rating label, usually on the frame behind the storage or warming drawer, or around the oven door opening; match it letter for letter before booking, because a single letter can change parts.

Frequently asked questions

Known problems

Common issues for this model

  • Control panel or knob problems
  • Convection fan or oven light not working
  • Oven not reaching or holding temperature
  • Burner will not ignite or keeps clicking
Get it fixed

Recommended repair service

Helpful notes

Troubleshooting resources

Note whether the problem is on the cooktop, the oven, or both, and the fuel type.

Ready to get your Bosch appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 851-9513 Book a Repair