Bosch SGE53C56UC ADA-Compliant Built-in Dishwasher
Early-stopping cycles and wet dishes are the usual calls for this black 13-place dishwasher with a built-in softener.
Model overview
This black SGE53C56UC is a recessed-handle, ADA-compliant Bosch dishwasher with 13 place settings and a rated operating noise of 46 dBA. An integrated water softener is part of the design, which matters in homes with hard water, and PureDry handles drying. RackMatic offers three upper rack height positions, but the model has no third rack. Owners in San Francisco and the Bay Area should note whether a cycle stops early, whether dishes come out wet, or whether water stays in the tub. In the booking form, include the symptom, the full model number from the rating label and any code shown.
At a glance
| Model | SGE53C56UC |
|---|---|
| Appliance | 24-inch ADA-compliant built-in dishwasher |
| Common symptoms | cycle stops early or will not start; door latch or control panel problems; dishes not getting clean or dry; water left in the tub after the cycle |
| What you can check | Note the cycle used, whether water is left in the tub, and any code or flashing light. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Capacity | Capacity is 13 place settings. |
|---|---|
| Power | Rated input is 1,440 W at 120 V, 60 Hz. |
| Features | Operating noise is rated at 46 dBA. The drying system is PureDry. No third rack is fitted. RackMatic provides three upper rack height positions. A water softener is integrated. |
| Finish | The exterior finish is black. |
What sets the SGE53C56UC apart
The black finish and the recessed handle are the visible differences, but the more useful distinction is the integrated water softener, which sits inside the unit so the owner does not add a separate device. Without a third rack, the upper rack's three height positions set how much room the glassware and cups get, so the owner plans each load around that choice.
Service notes for the SGE53C56UC
A water softener built into the dishwasher adds a regeneration step that technicians check when cycles stop early or dishes come out cloudy and wet. The first checks are the water supply pressure and, if the softener uses salt, the salt reservoir, followed by the filter and the drain path. Door latch faults on a black recessed-handle unit are traced to the latch and the handle linkage. The owner can safely clear the filter, confirm the salt reservoir is full if the unit has one, and check the upper rack position. Note whether the cycle stopped during the wash or during drying, since that narrows the list quickly.
The model number is printed on the rating label, usually on the edge of the door or the side of the tub, visible when the door is open; match it letter for letter before booking, because a single letter can change parts.
Frequently asked questions
It holds 13 place settings and has no third rack.
Yes, a water softener is integrated, and the dishwasher's rated operating noise is 46 dBA.
Check the rating label on the edge of the door or the side of the tub, visible when the door is open. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in San Francisco and the Bay Area. Add the model number and the symptom to the booking form.
Common issues for this model
- Cycle stops early or will not start
- Door latch or control panel problems
- Dishes not getting clean or dry
- Water left in the tub after the cycle
Recommended repair service
Troubleshooting resources
Note the cycle used, whether water is left in the tub, and any code or flashing light.
Error codes for this appliance
Bosch Dishwasher 4 LEDs Flashing / Flashing Active and Clean Lights Error Code
Bosch Dishwasher 4 LEDs Flashing Along with Beeping Error Code
Bosch Dishwasher 4 LEDs Flashing with Beeping
Bosch Dishwasher E01 / E0100 Error Code
Bosch Dishwasher E0110 Error Code
Bosch Dishwasher E02 / E03 / E0103 / E0107 / Flashing Sanitized Lights Error Code
Repair service
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.