Source: Bosch US Owner Support - Dryer Error Codes
E06 is a heating-circuit fault. Bosch lists it as a code only a technician can eliminate.
On a Bosch dryer, E06 refers to the heating circuit. Bosch’s European error list describes it as a heating-circuit fault that needs an engineer. The US owner-support page puts E06 in a group of codes that, in Bosch’s words, can only be eliminated by a technician.
At a glance
| Code | E06 |
|---|---|
| Appliance | Dryer |
| What it means | E06 on a Bosch dryer indicates a fault with the heating circuit that only a technician can fix. |
| When to call a technician | Bosch lists it as a code only a technician can eliminate. |
What the heating circuit is
The heating circuit is everything that produces and controls the dryer’s heat: the heater, the wiring that feeds it, and the safety parts that cut it off if things get too hot. Bosch’s E06 entry does not say which of these has failed, so the page you are reading cannot narrow it down either. Finding the faulty part takes electrical testing inside the cabinet.
Safe steps for the owner
- Stop using the dryer for now. Bosch gives no owner fix for E06.
- If you want to try a reset, use Bosch’s general power cycle: unplug the dryer or switch off its breaker, wait at least five minutes, and reconnect.
- Leave the panels on. The heating circuit carries mains power, and that work belongs to a technician.
If E06 comes back after the power cycle, arrange service. Bosch’s US page lists a technician as the next step for this group of codes.
Codes that sound similar
- E63: a heating element problem, where Bosch does allow an unplugged visual check
- E12: overheating, possibly from restricted airflow, with owner checks Bosch lists
- E08 / E09 / E24 / E25 / E28 / E90: electronics faults on the same technician-only list
Bosch dryer heating repair, San Francisco
Call (415) 851-9513 for an E06 visit. Have the model number ready, and tell us if the dryer was running warm or cold when the code appeared.