Source: Bosch US Owner Support - Freestanding Ranges Error Codes
The range's user interface and power board have lost communication. A five-minute breaker reset is Bosch's first step.
Bosch lists this code in lowercase, e005, for both its electric and gas freestanding ranges. It means the user interface and the power board have stopped talking to each other. The user interface is the panel of buttons and display you use. The power board is the electronics that switch power to the range’s heating parts.
At a glance
| Code | E005 |
|---|---|
| Appliance | Range |
| What it means | There is a communication failure between the user interface and the power board. |
| First thing to try | Turn the range off at the circuit breaker. |
A five-minute power reset
- Turn the range off at the circuit breaker.
- Leave it off for five minutes.
- Switch the breaker back on and watch whether e005 returns.
Bosch specifies five minutes, so use the full wait rather than a quick off-and-on flip. Bosch gives the same step for gas and electric models.
If the code is back after the reset
Bosch’s next instruction is to book a service visit. The two boards sit inside the range, and Bosch lists no further owner check for this code. Do not pull the range out to look at the wiring yourself. The connections behind the range carry household current, and gas models also have a gas line.
Codes that involve the same electronics
- E100: a general electronics fault with the same reset
- E302 / e302: the power board or control panel overheated
- e011: a touch sensor problem on the oven control panel
Bosch range service in San Francisco
When e005 survives the five-minute reset, call (415) 851-9513. Say whether your range is gas or electric.