Skip to content
Error Code

Bosch Dishwasher E15 / E3100 / Flashing Active Lights Error Code

Source: Bosch US Owner Support - Dishwasher Error Codes

Error code E15 / E3100 / Flashing Active Lights
Appliance Dishwasher
Quick answer

The leak protection system has tripped because water reached the base. Bosch's instruction: shut off the water and contact service.

E15 / E3100 / Flashing Active Lights needs a technician on site

E15 / E3100 / Flashing Active Lights points to e15 is a water-safety code: the dishwasher has detected water in its base and activated leak protection — an internal part that can’t be checked or fixed safely from the outside. A restart may hide it for a while, but the cause stays. Our technician tests it on site and confirms the fault before any part is replaced.

E15 means the dishwasher’s leak protection has tripped. A safety switch in the base of the machine has detected water where none should be, and the leakage protection system is now active. Bosch lists E3100 (E:31-00 in the printed manuals) and a flashing Active light with the identical description.

At a glance

Code E15 / E3100 / Flashing Active Lights
Appliance Dishwasher
What it means A safety switch has detected water in the base of the dishwasher and the leakage protection system has been activated.
First thing to try Turn off the water supply to the dishwasher. The valve is usually under the sink.

Do this now

  1. Turn off the water supply to the dishwasher. The valve is usually under the sink.
  2. Contact service.

That is Bosch’s complete instruction for this code, on the US support page and in its manual. There is no reset step and no owner check listed. Unplugging the machine as well is good sense while you wait, since water and electricity are both involved.

What the base and the safety switch are

Under the tub of a Bosch dishwasher is a base pan. If water escapes from anywhere inside the machine, it collects there. A switch in the base reacts when water reaches it, and the control then puts the leak protection into effect. In other words, the code is reporting that a leak has already happened inside the cabinet. It does not say where the water came from.

The source of the water is not something Bosch asks owners to trace. Finding it means removing panels and running the machine with them off, which is technician work.

What you can safely note for the technician

  • Whether there is water on the floor in front of or beside the dishwasher.
  • Whether the code appeared during filling, washing or draining.
  • Roughly how long ago the dishwasher was installed or last moved.

These observations help the visit go faster. Don’t tip the machine to drain the base yourself.

E15 and E31-00 questions

Neighboring codes

Leak service for Bosch dishwashers, San Francisco

With the water off, call (415) 851-9513. Tell us if water reached the floor. Bosch’s manual places the rating plate with the E-Nr inside the door.

Plain language

What this code means

A safety switch has detected water in the base of the dishwasher and the leakage protection system has been activated.

Ready to get your Bosch appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 851-9513 Book a Repair