Skip to content
Error Code

Bosch Dishwasher E16 / E17 / E3300 / E3400 Error Code

Source: Bosch US Owner Support - Dishwasher Error Codes

Error code E16 / E17 / E3300 / E3400
Appliance Dishwasher
Quick answer

An inlet or filling-system issue. Bosch's single owner check is the inlet hose; past that it is a service call.

Bosch groups E16 and E17 on its support page under one heading, and lists E3300 and E3400 with the same text. The message is that something is wrong with water flowing into the dishwasher or with the filling system, and that water may not be able to enter the tub at all.

At a glance

Code E16 / E17 / E3300 / E3400
Appliance Dishwasher
What it means There is an issue with water flowing into the dishwasher or the filling system, and water may not be able to enter the dishwasher.

The one check Bosch gives

Look at the inlet hose and make sure it is not kinked or damaged. That is the full owner step for this code.

  • A sharp fold in the hose can restrict the flow.
  • Cracks, bulges or damp spots on the hose mean it is damaged. Close the valve before doing anything else.
  • While you are under the sink, confirm the valve is open.

Once the hose is straight and the valve open, start a cycle and check whether the code returns.

Why Bosch stops there

The filling system is the set of parts that lets water into the tub and measures it. Most of it sits inside the base of the machine, behind panels that should only come off with the power disconnected. Bosch’s support page refers you to a technician for anything beyond the hose, and that is the safe line to hold. Water and mains wiring share that space.

A note on E3400

Bosch’s US support page lists E3400 with E16 and E17. One of Bosch’s printed dishwasher manuals describes E:34-00 differently, as water running into the appliance continuously, with the instruction to turn off the water tap and call customer service. If your machine is filling without stopping, or you see water rising where it should not, close the supply valve first and then call.

Codes in the same family

  • E18 / E200: water level too low; adds a check of the supply and its flow rate.
  • E32-00: supply problem including a blocked inlet filter.
  • E15 / E3100: water detected in the base tray.

Bosch inlet repair in San Francisco

If the hose is fine and the code is still there, call (415) 851-9513. Tell us which of the four numbers you see, since that helps narrow it down.

Plain language

What this code means

There is an issue with water flowing into the dishwasher or the filling system, and water may not be able to enter the dishwasher.

Ready to get your Bosch appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 851-9513 Book a Repair