Source: Bosch US Owner Support - Dishwasher Error Codes
Bosch says the heat pump is blocked. A breaker reset is the only owner step; repeat codes need a technician.
Bosch’s description of E21 is one short sentence: the heat pump is blocked. E6002, its four-digit counterpart, says the same. Because the entry is that short, it sticks to what the term means and what Bosch actually asks you to do.
At a glance
| Code | E21 / E6002 |
|---|---|
| Appliance | Dishwasher |
| What it means | The heat pump is blocked. |
| When to call a technician | A breaker reset is the only owner step; repeat codes need a technician. |
The heat pump in a Bosch dishwasher
The heat pump is the circulation pump, the part that pushes wash water up to the spray arms, combined with the heater that warms that water.
Bosch does not say what does the blocking, and it does not list any cleaning step for this code. Unlike the drain pump, which owners can reach under the filter for drain codes, the heat pump is not listed as owner-accessible.
Bosch’s instruction
- Switch the dishwasher off at its breaker.
- Leave the power off for 30 seconds.
- Switch back on and run a cycle.
- If E21 or E6002 reappears, book a technician.
When to stop trying
One reset is reasonable. Repeated resets on a pump that the control has already reported as blocked are not, because a motor that cannot turn should not be powered over and over. If the code is back, leave the dishwasher off and book service. Mention any unusual noise you heard from under the tub before the code appeared, since that is something you can report without opening anything.
Codes about the same part
- E01 / E0100: heat pump motor circuit fault.
- E12 / E2060: limescale build-up in the heat pump.
- E23 / E6101: a different pump, the drain pump, blocked or faulty.
Heat pump service for Bosch owners in San Francisco
Call (415) 851-9513 if E21 is still there after one reset. Have the model number from the dishwasher ready.