Skip to content
Error Code

Bosch Oven E11 Error Code

Source: Bosch US Owner Support - Ovens & Microwaves Error Codes

Error code E11
Appliance Oven
Quick answer

E11 means the oven's touch keys are not responding properly, which Bosch says may be due to condensation on the keypad. Dry the panel and reset the power.

Bosch’s owner-support page for ovens lists E11 as a problem with the touch keys: they are not operating properly. Bosch adds a likely reason, condensation on the keypad. Unlike most oven codes, this one comes with steps an owner is expected to try.

At a glance

Code E11
Appliance Oven
What it means The touch keys are not operating properly, possibly because of condensation on the keypad.
First thing to try Clean the control panel with a dry cloth. Wipe the whole key area, not just the key you were pressing.

Why moisture matters on a touch panel

Touch keys respond to your finger through the panel surface instead of moving parts. A film of moisture across that surface can confuse them. Since Bosch names condensation as a possible reason, it is worth ruling out before assuming the keypad has failed.

Bosch’s fix, step by step

  1. Clean the control panel with a dry cloth. Wipe the whole key area, not just the key you were pressing.
  2. Cut the power for 10 seconds. Switch off the oven’s fuse or breaker in your electrical panel, wait 10 seconds, and switch it back on.

Then try the keys (set the clock first if the display asks).

If E11 does not clear

For any E code that keeps appearing, Bosch’s guidance is to note the code, turn the oven off at the fuse box, and arrange a service visit. Pressing any key stops the beeping that may come with an error display. Do not try to dry the panel with heat, and do not take it apart; the keypad electronics sit behind it.

Short answers

Is E11 the same as E011?
Not according to Bosch’s own wording. E011 comes from the service manual for 2007 built-in wall ovens and means one key is registering as held down. E11 is on the owner-support page and describes touch keys not working properly. Drying the panel is a reasonable first step for both.

Can I keep cooking?
If the keys respond normally after the dry wipe and power reset, yes. If they still misbehave, leave the oven off until it is checked.

More keypad codes

  • E011: a single key reading as pressed continuously
  • E032: several keys pressed at once for 10 seconds
  • E014: the ON/OFF key does not respond

Bosch oven touch panel service in San Francisco

When E11 survives a dry wipe and a power reset, call (415) 851-9513. Have the model number and tell us you already did both Bosch steps.

Plain language

What this code means

The touch keys are not operating properly, possibly because of condensation on the keypad.

Ready to get your Bosch appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 851-9513 Book a Repair