Source: Service Manual for 300, 500 and 800 Series Built-in Wall Ovens (Bosch HBL8x50UC, HBL57x0UC, HBL56x0UC, HBL54x0UC, HBL35x0UC, HBL33x0UC, HBN56x0UC, HBN54x0UC, HBN35x0UC, HBN34x0UC, HBN3350UC), section 5.1 Error Code Table
E014 means the oven's ON/OFF key does not work. The service manual lists the fault with no owner steps.
The description for E014 is about as plain as Bosch error codes get: the ON/OFF key does not work. It comes from the error table in Bosch’s service manual for the 2007 300, 500 and 800 Series built-in wall ovens. No cause or test sits next to it in the table.
At a glance
| Code | E014 |
|---|---|
| Appliance | Oven |
| What it means | The ON/OFF key does not work. |
What this means day to day
The ON/OFF key is one of the keys on the control panel, which Bosch calls the user interface. When the electronics decide that key is not responding, they flag it with E014. You may find the oven will not switch on or off from the panel the way it normally does.
Things worth checking
- Make sure the key area is clean and dry, and that nothing is resting on the panel.
- If you need the oven off and the key will not do it, use the circuit breaker. Bosch’s manual uses a breaker shut-off as its standard reset, held for 30 seconds.
- After power returns, see whether the key responds and whether E014 comes back.
Do not press hard on a glass panel or pry at the trim. The keys are part of the interface board, which is removed from the front by a technician.
When it becomes a repair
If the code returns after a reset, the user interface assembly needs attention. Bosch services the board and its chassis as one unit and calls for a reset and test after it is installed.
Other key and panel codes
- E011: one key reading as held down
- E032: several keys pressed for 10 seconds
- E010: memory fault in the same interface board
ON/OFF key repair in San Francisco
If E014 stays after a breaker reset, call (415) 851-9513. Let us know whether the oven can still be switched off from the panel at all.