Source: Bosch US Owner Support - Slide-In Ranges Error Codes
The range is in demo mode, so the cooking zones stay cold. Bosch's fix is a 30-second breaker cut and a touch within 3 minutes.
Demo mode is the reason a new-looking Bosch induction slide-in range can show dE and refuse to heat its cooking zones. Bosch’s slide-in range page lists dE in its induction section with exactly that meaning: demo mode is on, and the zones do not heat up.
At a glance
| Code | dE |
|---|---|
| Appliance | Range |
| What it means | Demo mode has been activated, so the cooking zones do not heat up. |
Turning demo mode off on a range
Bosch’s method uses the electrical panel. Switch off the range’s circuit breaker or fuse for 30 seconds. Switch it back on, and touch any control on the range within the next 3 minutes. Bosch’s steps require the touch within 3 minutes, so do not walk away after restoring power.
Practical tips
| Situation | What to do |
|---|---|
| Breaker panel not labeled | Look for a breaker marked for the range or oven, or ask an electrician to label the panel. |
| Missed the 3-minute window | Cut the power for 30 seconds again and repeat. |
If dE does not go away
Bosch gives no further owner step for dE. A range that is still in demo mode after a correct power cut and touch needs service.
Related range codes
- F8 with H/h: zones stopped by the automatic time limit
- dE on a Bosch cooktop: the same mode on electric and induction cooktops
Bosch range repair for San Francisco homes
If your range stays in dE after the breaker method, call (415) 851-9513.