Source: Bosch US Owner Support - Freestanding Ranges Error Codes
Someone switched on the cooktop while the oven was in Self Clean. Turn off the zone and start Self Clean again.
ERR/toP is less an error than a rule being enforced. Bosch’s freestanding range list says it appears when the cooktop has been turned on during an active Self Clean cycle. It is listed for both electric and gas freestanding models.
At a glance
| Code | ERR/toP |
|---|---|
| Appliance | Range |
| What it means | The cooktop was activated during an active Self Clean cycle. |
| First thing to try | Turn off any cooking zone that is on. |
How to clear ERR/toP
- Turn off any cooking zone that is on.
- Start the Self Clean function again.
Bosch lists no service step for this code.
Why the range objects
Self Clean runs the oven at a very high temperature with the door locked. Bosch’s entry shows the range will not accept the cooktop being switched on during that cycle. Plan Self Clean for a time when you will not need the cooktop.
Before you start Self Clean
A quick look at the range top saves a restart. Make sure every cooking zone is off and its indicator is dark before you start the cycle, and let anyone else in the house know the cooktop is out of use until Self Clean has finished. If someone does switch a zone on mid-cycle, ERR/toP is the result, and the two steps above put things right.
Safety while Self Clean is running
- The cooktop and the front of the range can get hot during the cycle, even with every zone off.
- Keep pans, towels and utensils off the cooktop until the cycle has finished and the range has cooled.
- Do not try to open the locked oven door.
Related freestanding range codes
Bosch freestanding range service in San Francisco
ERR/toP should clear with the two steps above. If it shows with every zone off, call (415) 851-9513.