Source: Appliance Helpers - Bosch Range Error Codes
Bosch range F125 is linked with cancel touch-key voltage outside the allowed range. Review the visible symptoms, model details, and safe external checks before deciding on the next step.
When a Bosch range displays F125, the control has registered cancel touch-key voltage outside the allowed range. That directs attention toward the electronic control path, but the exact model/E-Nr and symptom pattern are still needed before choosing a repair path.
At a glance
| Code | F125 |
|---|---|
| Appliance | Range |
| What it means | When a Bosch range displays F125, the control has registered cancel touch-key voltage outside the allowed range. That directs attention toward the electronic control path, but the exact model/E-Nr and symptom pattern are still needed before choosing a repair path.Treat |
Treat the warning as evidence, not a complete repair instruction. Do not bypass interlocks, leak protection, electrical safeguards, or sealed systems just to clear the display. This message concerns the electrical signal from the Cancel key, separate from the other keys’ signals.
At a glance
- Code: F125
- Appliance: Bosch Range
- Verified meaning: cancel touch-key voltage outside the allowed range
- Primary diagnostic direction: the electronic control path
- Service-area context: San Francisco; confirm coverage by ZIP code
What the warning means
F125 means cancel touch-key voltage outside the allowed range. The warning narrows the diagnostic path toward the electronic control path, while the exact model and symptom sequence determine how that information should be applied.
A voltage outside the allowed range means the control reads that key’s signal as unusable, not necessarily that the key is pressed. Confirming the exact code, F125, keeps the focus on the Cancel path.
Symptoms worth recording
Before changing settings or cycling power, record the behavior you can see or hear:
- Controls may be unresponsive or inconsistent.
- The appliance may halt before completing the selected function.
- A code may reappear immediately after startup.
- One feature may fail while others remain available.
Possible causes
Diagnosis may need to consider the following possibilities without treating any single one as confirmed:
- An internal control-board fault.
- Memory or configuration data outside the expected state.
- A relay or electronic switching fault.
- Wiring, supply, or a connected load affecting the control.
- A Cancel key signal outside range from the key surface, its circuit, or the control.
First steps that stay outside the appliance
- Write down the exact display and full model number.
- Keep the control surface clean and dry where touch controls are involved.
- Follow one normal manufacturer-approved power reset when there is no sign of electrical damage.
- Avoid replace a control board from the code alone.
These checks are for information gathering only. Do not expose live wiring, bypass an interlock, defeat leak protection, open a sealed refrigeration circuit, or use undocumented service-mode procedures.
When to stop using the appliance
Stop immediately for smoke, burning odor, sparking, visible electrical damage, or repeated breaker trips.
When diagnosis becomes the next step
If the warning comes back, the control board, connected loads, wiring, supply, and configuration need platform-specific testing. The useful service history includes when the code appears, whether it is repeatable, and what changed immediately before it.
For a service request, include what the appliance was doing immediately before the warning and which safe checks were already completed.
Why the full Bosch model/E-Nr matters
Bosch can reuse similar display characters across different range generations. Confirm the full model/E-Nr before applying platform-specific repair information. The complete E-Nr lets us match the keypad design before testing begins.
FAQ
For this record, F125 is associated with cancel touch-key voltage outside the allowed range. The exact model/E-Nr still matters because Bosch can use different hardware and diagnostic logic across product families.
Only if no safety stop condition is present and the appliance is otherwise operating safely. If the warning repeats, performance is abnormal, or there is leaking, smoke, electrical odor, sparking, overheating, or repeated breaker trips, leave the appliance off.
Use only a normal reset that Bosch documents for the exact model. If the warning returns, repeated resets are not a substitute for diagnosis.
No. The code identifies a detected system condition. Model information, symptoms, and model-specific testing are still needed before a component is selected.
Have the full Bosch model/E-Nr, the exact F125 display, the cycle stage or operating state where it appears, the visible symptoms, and the external checks already completed.
Bosch service in the San Francisco area
Still seeing F125?
If F125 remains active or comes back, request Bosch range diagnosis for the San Francisco service area. Include the complete model/E-Nr, exact code, symptom summary, and ZIP code so service coverage can be confirmed.