Source: Bosch US Owner Support - Slide-In Ranges Error Codes
The range-top electronics got too hot and switched off the matching cooking zone. Wait for them to cool, then touch any control.
F2 on a Bosch induction slide-in range points to heat in the electronics that run the cooking zones. When they overheat, the range switches off the cooking zone that matches them. Bosch’s slide-in range page puts F2, F4 and E7015 in one entry with that meaning.
At a glance
| Code | F2 |
|---|---|
| Appliance | Range |
| What it means | The electronics have overheated and the corresponding cooking zone has been switched off. |
| First thing to try | Leave the range top alone until the electronics are cool enough. |
F2 in practice
You will notice one zone on the range top stop heating while F2 shows on the display. The oven is not mentioned in this entry. Bosch frames the fix as a cool-down, not a repair: there is no breaker reset and no service step for this code on the slide-in page.
Restart steps
- Leave the range top alone until the electronics are cool enough.
- Touch any control element on the range.
- When F2 is gone from the display, you can go on cooking.
How F2 differs from F1 on a range
F1 is the zone itself overheating to protect the surface. F2 is the electronics behind the zones running too hot. If you see both codes in a short time, write down the order they appeared in.
F2 questions
Does E7015 mean something else? Not on Bosch’s slide-in range list. It shares the F2 entry and the same restart steps.
Should I worry if F2 shows on a cold range? Bosch describes F2 as an overheating code. If it appears before the range top has been used, that is outside the description and worth a service visit.
Related codes
- F4: listed in the same entry as F2
- F1: the cooking zone itself overheated
- F2 on a Bosch cooktop: where Bosch adds E8207, E8208 and an ignition variant
Bosch range-top service, San Francisco
If F2 keeps returning, call (415) 851-9513. It helps to know whether your display shows F2 or E7015.