Skip to content
Error Code

Bosch Cooktop F2 Error Code

Source: Bosch US Owner Support - Cooktops & Rangetops Error Codes

Error code F2
Appliance Cooktop
Quick answer

The cooktop electronics got too hot and switched off the matching zone. F2 can also stop the automatic ignition.

F2 needs a technician on site

F2 points to cooktop electronics overheated — an internal part that can’t be checked or fixed safely from the outside. A restart may hide it for a while, but the cause stays. Our technician tests it on site and confirms the fault before any part is replaced.

F2 on a Bosch cooktop points at the electronics rather than the cooking zone. Bosch says the electronics have overheated, so the cooking zone tied to them has been switched off. Induction models list the same fault under four more numbers: F4, E7015, E8207 and E8208.

At a glance

Code F2
Appliance Cooktop
What it means The electronics have overheated and the corresponding cooking zone has switched off.

How F2 is listed by cooktop type

Cooktop section on Bosch’s page Numbers in the entry What stops
Electric F2 The corresponding cooking zone
Induction F2, F4, E7015, E8207, E8208 The corresponding cooking zone
Also listed on Bosch’s cooktop page for automatic ignition F2, F4 or F5 The automatic ignition

Bringing an electric or induction zone back

  1. Give the electronics time to cool down enough.
  2. Touch any control on the cooktop.
  3. Continue cooking once F2 has cleared from the display.

Bosch links the restart to two conditions at once: the message has gone, and the electronics are cool enough.

F2 and the automatic ignition

Bosch’s cooktop page also lists F2, F4 or F5 for when the automatic ignition is not working. The cause is the same, overheated electronics, but the fix is different. Turn all burners off, or keep them at the minimum power level, until the electronic system has cooled. Do not keep pressing the ignition on a burner that will not light. If you smell gas, do not try to light any burner or touch electrical switches; leave the home and call your gas utility from outside.

F2 compared with F1

Both codes switch a zone off, but for different reasons. F1 is the cooking zone itself overheating, and Bosch says that shutdown protects the work surface. F2 is the electronics running hot. If the two keep alternating, mention both when you call.

See also

  • F4: on electric cooktops, all zones switch off instead of one
  • F5: overheating risk caused by hot cookware near the controls
  • F1: the cooking zone itself overheated
  • F2 on a Bosch range: the slide-in range listing

Bosch cooktop repair across San Francisco

For F2 that keeps returning on a cool cooktop, call (415) 851-9513. Let us know which number your display uses, F2 or one of the E-numbers.

Plain language

What this code means

The electronics have overheated and the corresponding cooking zone has switched off.

Ready to get your Bosch appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 851-9513 Book a Repair