Skip to content
Error Code

Bosch Range F5 Error Code

Source: Bosch US Owner Support - Slide-In Ranges Error Codes

Error code F5
Appliance Range
Quick answer

A hot pan is too close to the range's control panel. Move it; if the zone already shut off, wait a few seconds and touch a control.

F5 on a Bosch induction slide-in range has a cause you can fix with one hand: hot cookware is sitting near the control panel. Bosch’s slide-in page lists F5 twice, once as an early warning and once after the range has already acted.

At a glance

Code F5
Appliance Range
What it means Hot cookware near the control panel is putting the electronics at risk of overheating or has caused a zone to switch off.

F5 with a flashing power level

If the power level on the display flashes back and forth with F5 and you hear a signal tone, the range is warning you. The electronics are at risk of overheating, but nothing has switched off yet. Move the cookware away from the control panel and keep cooking. That is the entire fix Bosch gives for this version.

F5 with a tone and no flashing

When F5 comes with only the signal tone, the warning stage has passed. The cooking zone has switched off to protect the electronics. Bosch’s sequence:

  1. Take the cookware away from the control panel.
  2. Wait a few seconds.
  3. Touch any control element on the range.
  4. Once F5 disappears and the electronics are cool enough, set the zone and continue.

Where the panel sits on a slide-in range

Bosch ties F5 to cookware near the control panel, . Check for large pans or hot lids near the control panel first. Wiping spills from the panel is good practice too.

Questions about range F5

Does F5 affect the oven? Bosch’s entries talk about the cooking zone and the electronics near the control panel. The oven is not mentioned.

F5 keeps appearing with no pan near the controls. Now what? Bosch only describes F5 as a cookware-placement code. If it shows with the panel area clear, have the range checked.

Related range codes

  • F2: the electronics overheated and a zone shut off
  • F4: listed with F2 on the slide-in range page
  • F5 on a Bosch cooktop: includes a version for burner ignition

Bosch slide-in range repair in San Francisco

If F5 appears with nothing near the control panel, call (415) 851-9513. Note whether the power level was flashing.

Plain language

What this code means

Hot cookware near the control panel is putting the electronics at risk of overheating or has caused a zone to switch off.

Ready to get your Bosch appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 851-9513 Book a Repair