Source: Bosch US Owner Support - Slide-In Ranges Error Codes
The voltage feeding the range is outside its normal operating range. Bosch points owners to the electric utility or a technician.
Bosch’s induction slide-in range page lists U400 in one entry and E9000 or E9010 in another, and gives both entries the same words. The supply voltage is incorrect, outside the normal operating range. Whichever of the three numbers your range shows, it is the same problem.
At a glance
| Code | U400 / E9000 / E9010 |
|---|---|
| Appliance | Range |
| What it means | The supply voltage is incorrect and outside the normal operating range. |
| When to call a technician | Bosch points owners to the electric utility or a technician. |
One problem, three numbers
Bosch does not explain why a range would show U400 instead of an E-number. It describes all three identically and gives the same direction for each, so they are covered together.
The supply, not the range
These codes say the electricity reaching the range is not within its normal limits. Bosch gives no reset for these codes. Instead it says to contact your electrical utility provider or a technician.
What you can safely do
- Check whether the range’s breaker has tripped. Do not remove the panel cover.
- Notice whether lights dim when the code appears, or whether the problem lines up with other appliances turning on.
- Call the utility and describe what you saw.
Leave voltage testing at the outlet or terminal block to an electrician. A range circuit can cause serious injury.
U400 questions
Will the range work while U400 is showing? Bosch does not say. Since the supply is outside the normal range, it is better not to keep using it until the cause is known.
What if the utility says the supply is fine? Bosch’s other route is a technician. You can also ask an electrician to check the circuit, and look at E9011, which covers a wrong connection.
Related codes
- E9011: the range is not connected properly
- e310: the freestanding-range power supply code
- U400 / E9000 / E9010 on a Bosch cooktop: the cooktop listing
Bosch induction range service in San Francisco
If the voltage code remains after the utility has checked the supply, call (415) 851-9513. Tell us the exact number on the display.