Source: Bosch US Owner Support - Slide-In Ranges Error Codes
Bosch says the range is not connected properly. The fix is to disconnect power and check the hookup against the circuit diagram.
Bosch lists E9011 in the induction section of its slide-in range page, and the meaning on that page is direct: the appliance is not connected properly. It is an installation-side message about how the range is wired to the house, not about a cooking zone or the oven.
At a glance
| Code | E9011 |
|---|---|
| Appliance | Range |
| What it means | The appliance is not connected properly. |
| First thing to try | Disconnect the range from the power supply. |
Bosch’s two-step check
- Disconnect the range from the power supply.
- Make sure it has been connected as shown in the circuit diagram.
The circuit diagram is the wiring drawing for the range. It shows how each supply wire should land on the range’s terminals.
This is a job for the installer or an electrician
Checking the hookup means working on the range’s electrical connection, so leave it to the installer or an electrician. If the range was just delivered or moved, call whoever installed it first. Have them compare the connection with the diagram, as Bosch asks.
Range wording versus cooktop wording
Bosch’s cooktop page uses the same number differently. There, E9011 shares an entry with U400 and can also mean the supply voltage is outside the normal range. The slide-in range page names only the connection. If the hookup checks out and E9011 remains, it is reasonable to have the supply voltage looked at too, and to tell the technician exactly what was checked.
Related pages
- U400 / E9000 / E9010: supply voltage outside the normal range on this range type
- E9011 on a Bosch cooktop: the version that also covers voltage
Slide-in range service for Bosch owners in SF
If E9011 stays after the hookup has been checked against the diagram, call (415) 851-9513. Let us know when the range was installed.