Source: Bosch US Owner Support - Cooktops & Rangetops Error Codes
Bosch names two causes for E9011 on a cooktop: an incorrect electrical connection or a supply voltage outside the normal range.
On its induction cooktop list, Bosch puts E9011 in the same entry as U400 and says the code can have more than one cause. It names two. Either the voltage reaching the cooktop is outside the normal operating range, or the cooktop itself is not connected correctly.
At a glance
| Code | E9011 |
|---|---|
| Appliance | Cooktop |
| What it means | The cooktop is not connected correctly, or the supply voltage is outside the normal operating range. |
Cause one: the voltage arriving at the cooktop
An induction cooktop expects its supply to stay inside a set range. When it does not, Bosch tells owners to contact their electrical utility provider or a technician. No owner reset is listed for this side of the fault.
Cause two: the hookup itself
For the connection side, Bosch’s instruction is to disconnect the cooktop from the main power source and reconnect it according to the circuit diagram. The circuit diagram is the wiring drawing for the appliance. It shows which supply conductor lands on which terminal.
In a real kitchen, that is electrician work. Reconnecting a cooktop means working on its electrical connection, so leave it to an electrician. If the cooktop was installed or moved recently, the installer is the first person to ask.
What to write down for the electrician or technician
- When E9011 first appeared, and whether it followed an installation, a remodel or panel work.
- Whether lights or other appliances in the home flicker or dim at the same time.
- Whether the code shows the moment the breaker is turned on, or only once a zone is running.
These notes help separate a supply problem from a wiring problem without anyone guessing.
Where E9011 sits among the power codes
E9000 and E9010 are voltage-only codes, as is U400 on electric cooktops. On induction cooktops Bosch lists U400 together with E9011, with both possible causes. Bosch’s slide-in range list describes its E9011 as an incorrect connection only.
- U400 / E9000 / E9010 on cooktops: supply voltage outside the normal range
- E9011 on Bosch ranges: the same number, framed as a connection fault
- E7010: a connection problem with the network or hood, not the power wiring
Getting a Bosch cooktop serviced in San Francisco
With E9011 on the display, leave the cooktop’s breaker off and call (415) 851-9513. Say whether the cooktop was recently installed or rewired.