Skip to content
Model Reference

Bosch SPV68C73UC Custom-Panel Built-in Dishwasher

Leak codes and door latch faults are the usual calls for this compact custom-panel dishwasher.

Model number SPV68C73UC
Appliance category Dishwasher
About this model

Model overview

The SPV68C73UC is a compact custom-panel dishwasher from Bosch, measuring 17 5/8 inches wide, and it holds 10 place settings with a third rack included. Its CrystalDry system and rated operating noise of 44 dBA suit a smaller kitchen, and AquaStop Plus uses dual sensors to detect leaks. Owners in San Francisco and the Bay Area should keep in mind that a compact panel model leaves the technician less room at the door, so access matters. When you book, note the symptom, the full model number from the rating label and any code on the control panel.

At a glance

Model SPV68C73UC
Appliance 18-inch-class custom-panel built-in dishwasher
Common symptoms cycle stops early or will not start; door latch or control panel problems; water left in the tub after the cycle; dishes not getting clean or dry
What you can check Note the cycle used, whether water is left in the tub, and any code or flashing light.
When to call a technician If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit.

Specifications

Dimensions Dimensions are 32 1/16 inches high by 17 5/8 inches wide by 21 5/8 inches deep.
Capacity Capacity is 10 place settings.
Power Rated input is 1,440 W at 120 V, 60 Hz.
Features Operating noise is rated at 44 dBA. The drying system is CrystalDry. A third rack is included. AquaStop Plus uses dual sensors to detect leaks.
Finish The door accepts a custom panel.

What sets the SPV68C73UC apart

Compact custom-panel dishwashers are chosen for narrow openings, and this one trades some capacity for footprint at 10 place settings. AquaStop Plus uses dual sensors to detect leaks, which is the detail to compare if leak alarms are a concern. The CrystalDry system and the included third rack make a 10-place load more flexible than the number alone suggests.

Service notes for the SPV68C73UC

Leak detection on this model depends on two sensors, so a leak code should be read as a sensor event and not assumed to be a failed hose. The technician checks the sensor location and the water inlet before moving on to the drain side. Door latch trouble on a custom panel is checked at the latch and against the panel weight, since a heavy panel can stress the door over time. For a cycle that stops early, the technician looks at the door switch and the control panel before the pump. Safe owner checks are clearing the filter, confirming the door latches with a firm push, and making sure the panel does not drag on the frame. Note whether drying is poor, which often points to how the load was arranged as well as to the CrystalDry stage.

The model number is printed on the rating label, usually on the edge of the door or the side of the tub, visible when the door is open; match it letter for letter before booking, because a single letter can change parts.

Frequently asked questions

Known problems

Common issues for this model

  • Cycle stops early or will not start
  • Door latch or control panel problems
  • Water left in the tub after the cycle
  • Dishes not getting clean or dry
Get it fixed

Recommended repair service

Helpful notes

Troubleshooting resources

Note the cycle used, whether water is left in the tub, and any code or flashing light.

Fix it right

Repair service

Ready to get your Bosch appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 851-9513 Book a Repair