Skip to content
Error Code

Bosch Dishwasher E07 / E2130 Error Code

Source: Bosch US Owner Support - Dishwasher Error Codes

Error code E07 / E2130
Appliance Dishwasher
Quick answer

The fan that moves air through the Crystal Dry zeolite system has failed. One breaker reset, then a service visit.

E07 / E2130 needs a technician on site

E07 / E2130 points to the drying-system fan motor path — an internal part that can’t be checked or fixed safely from the outside. A restart may hide it for a while, but the cause stays. Our technician tests it on site and confirms the fault before any part is replaced.

If your Bosch dishwasher has Crystal Dry and shows E07 or E2130, Bosch’s support page is blunt about it: the Zeolite (Crystal Dry) fan motor is defective. Of all the Bosch dishwasher descriptions, this is one of the few that names a failed part outright rather than a circuit or a possible blockage.

At a glance

Code E07 / E2130
Appliance Dishwasher
What it means The Zeolite (Crystal Dry) fan motor is defective.
When to call a technician One breaker reset, then a service visit.

How Crystal Dry uses a fan

Crystal Dry is Bosch’s name for drying with zeolite, a natural mineral that soaks up moisture and gives off heat as it does. The zeolite sits in a chamber connected to the tub. During drying, the fan moves air from the tub through the zeolite chamber, where the zeolite absorbs moisture.

Without the fan, air does not move through the chamber, so the drying system cannot do its job. That is the part E07 is reporting on.

One reset, then decide

Bosch’s advice is to reset power at the breaker for 30 seconds. After restoring power, run a full cycle with drying. If E07 stays away, keep using the dishwasher and watch for a repeat. If it is back, Bosch directs you to a technician.

Things worth knowing

  • The fan is inside the machine. There is no owner-serviceable access to it.
  • Bosch’s text does not mention any blockage you can clear for this code.
  • Dishes coming out wetter than usual before the code appeared is something to mention when you book service.

Which number will my panel show?

Bosch lists E07 and E2130 with exactly the same description. They are the same fault.

Other Crystal Dry and heating codes

  • E10 / E2120: the heater in the same zeolite chamber.
  • E09 / E20: the heater inside the heat pump, which warms the wash water.

Crystal Dry service in San Francisco

For a Bosch technician, call (415) 851-9513. Tell us the code and whether the reset bought any time before it returned.

Plain language

What this code means

The Zeolite (Crystal Dry) fan motor is defective.

Ready to get your Bosch appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 851-9513 Book a Repair