Source: Bosch US Owner Support - Dishwasher Error Codes
Bosch links E14 and E3000 to the flow meter or the filling system and sends owners straight to a technician.
Bosch’s support page gives E14 and E3000 one description: either the flow meter has failed, or there is a problem with water flowing into the dishwasher or with the filling system. Unlike several of the neighboring fill codes, Bosch lists no owner check here. Its instruction is to have a technician check it.
At a glance
| Code | E14 / E3000 |
|---|---|
| Appliance | Dishwasher |
| What it means | There is a flow meter failure or an issue with water flowing into the dishwasher or the filling system. |
| When to call a technician | Bosch links E14 and E3000 to the flow meter or the filling system and sends owners straight to a technician. |
Bosch’s US support page lists E3000 as a flow meter or filling fault. One of Bosch’s printed dishwasher manuals describes E:30-00 differently, as the water protection system being activated, with the instruction to turn off the water tap and call customer service. If you see E:30-00, close the supply valve first and then call.
What a flow meter does
A dishwasher does not fill by time alone. As water comes in through the inlet, a flow meter counts how much has passed, and the control uses that count to decide when the tub has enough. If the meter stops reporting, or the reading does not make sense, the control cannot be sure how much water it has taken in, so it stops and shows the code.
The flow meter sits inside the machine on the water inlet path. Reaching it means opening the dishwasher, which belongs to a trained technician with the power disconnected.
What you can do safely
Bosch does not ask for any checks with this code, but there is no harm in confirming the obvious before you call:
- Whether the valve under the sink is open or closed.
- There is no water on the floor around the dishwasher.
If you do find water on the floor, turn the valve off. Don’t open panels or disconnect internal hoses.
Why the fill codes look alike
Bosch has several codes that all mention water coming in, and the wording overlaps. The difference is in what Bosch tells you to do. For E18 and E16 you get hose and supply checks. For E14 the page names a part, the flow meter, and goes straight to a technician.
Compare with
- E16 / E17 / E3300 / E3400: water may not be able to enter; check the inlet hose.
- E18 / E200: water level too low; hose and supply checks.
- E32-00: supply hose, tap and inlet filter.
E14 service calls in San Francisco
Call (415) 851-9513 for a Bosch technician. Have the code and model number ready.