Skip to content
Error Code

Bosch Dryer E03 Error Code

Source: Bosch US Owner Support - Dryer Error Codes

Error code E03
Appliance Dryer
Quick answer

E03 means the condensation drain hose is blocked or kinked. Bosch's fix is to make sure the hose runs without kinks.

A Bosch dryer that stops with E03 has a drainage problem, not a heating or airflow one. Bosch ties the code to the condensation drain hose: when that hose is blocked or kinked, water cannot drain properly and the error is triggered.

At a glance

Code E03
Appliance Dryer
What it means E03 on a Bosch dryer means the condensation drainage hose is blocked or kinked, which stops proper drainage.
First thing to try Switch the dryer off and unplug it.

Some background helps here. A condensation dryer does not blow moist air outside. It cools the air inside the machine so the moisture turns back into water, and that water has to go somewhere. Where the dryer is set up to drain through a hose, any bend or blockage in the hose holds the water back.

Checking the hose run

Bosch’s instruction is short: make sure the hose is installed without any kinks. To do that safely:

  1. Switch the dryer off and unplug it.
  2. Follow the drain hose from the back of the dryer to where it empties, usually a standpipe, sink or floor drain.
  3. Look for sharp bends, flattened sections, or places where the hose is squeezed against the wall or trapped under the machine. This often happens when a dryer is pushed back into a tight space.
  4. Straighten the run so the hose lies in smooth curves, then restart the dryer.

If the hose has been crushed flat for a long time, it may not round out again on its own. A damaged hose is worth replacing rather than taping.

Where to go from here

If the hose is straight and E03 stays, Bosch’s dryer page links to a further guide for this code, and its general reset is to unplug the dryer or turn off the breaker for at least five minutes. Past that, contact a dryer technician, since a blockage inside the machine is not something Bosch asks owners to open up.

Other dryer codes worth knowing

  • E01: also a blockage, but in the lint filter on the air side
  • E04: Bosch’s remedy is to leave about a hand’s width of space above the clothes

Bosch condensation dryer service, San Francisco

If straightening the hose did not help, call (415) 851-9513. Have the dryer’s model number and tell us where the hose drains to.

Plain language

What this code means

E03 on a Bosch dryer means the condensation drainage hose is blocked or kinked, which stops proper drainage.

Ready to get your Bosch appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 851-9513 Book a Repair