Source: Bosch US Owner Support - Dryer Error Codes
E01 means the lint filter is clogged with lint or softener residue. Clean it every cycle and rinse it with warm water now and then.
E01 is the Bosch dryer’s way of saying air cannot pass through the fluff filter. Bosch, which calls it the fluff or lint filter, links this code to a filter blocked with lint or with residue left by fabric softener.
At a glance
| Code | E01 |
|---|---|
| Appliance | Dryer |
| What it means | E01 on a Bosch dryer means the fluff (lint) filter is blocked with lint or fabric softener residue. |
Why a clogged filter stops the dryer
The lint filter sits in the airflow path and catches fibers that come off the laundry. Air has to pass through its mesh on every cycle. Once the mesh is packed with fluff, or coated so that air no longer passes freely, the dryer reports E01 instead of carrying on.
Cleaning routine from Bosch
- Pull out the lint filter and remove the fluff. Bosch’s advice is to do this after every drying cycle, not only when the code appears.
- Every so often, rinse the lint and fluff filter under warm water. This washes out the softener film that dry wiping leaves behind.
- Let the filter dry, slide it back in fully, and start the dryer again.
If E01 will not clear
Bosch’s reset advice for any dryer code is a power cycle. Unplug the dryer or switch its breaker off, leave it for at least five minutes, then restore power. If the code returns with a clean, dry filter in place, book a technician rather than running the dryer repeatedly.
Codes linked to airflow and cleaning
- E02: Bosch lists it together with E01 for the lint filter
- E12: overheating, where a dirty lint screen is one of the first things to check
- CrE: the care-program reminder, a different maintenance message
Bosch dryer help in San Francisco: repair visits
For an E01 that comes back after the filter is washed, call (415) 851-9513. Mention that the filter has already been rinsed so the visit can start from there.