Skip to content
Error Code

Bosch Dryer E02 Error Code

Source: Bosch US Owner Support - Dryer Error Codes

Error code E02
Appliance Dryer
Quick answer

Bosch ties E02 to a blocked lint filter and also gives a 30-second breaker reset. Try both, then call for service.

E02 needs a technician on site

E02 points to main heating circuit fault — an internal part that can’t be checked or fixed safely from the outside. A restart may hide it for a while, but the cause stays. Our technician tests it on site and confirms the fault before any part is replaced.

Bosch’s own pages give E02 on a dryer two entries, and it helps to know both. On its US dryer list, E02 sits next to E01 under the lint filter advice. A separate E02 entry on the same page gives a different instruction: reset the power at the breaker. Bosch’s European dryer error list also files E02 under a blocked fluff filter.

At a glance

Code E02
Appliance Dryer
What it means Bosch lists dryer E02 with E01 for a blocked fluff (lint) filter, and its US page also gives E02 a 30-second power reset at the breaker.

Two instructions, one order to try them

Bosch entry What it tells you to do
E01 or E02 Clean the lint filter after each drying cycle, and rinse the lint and fluff filter with warm water from time to time
E02 Switch the breaker off for 30 seconds, then on. If that does not fix it, book a technician

Start with the filter, since it takes a minute and is the cause Bosch names. Pull the filter, clear the fluff, and rinse the mesh under warm running water so any fabric softener coating comes off. Put it back once it is dry.

If E02 is still on the display, go to the breaker panel, switch off the dryer’s breaker, wait 30 seconds, and switch it back on.

What is left if both fail

Bosch’s next step after the reset is to contact service. It does not name a part beyond the filter for this code, so a technician has to find out why the control keeps flagging it. Keep a note of when the code appears, for example at start-up or part-way through a load.

Nearby codes

  • E01: the same lint-filter cleaning advice, without the breaker step
  • E03: a kinked or blocked drain hose, another blockage message
  • Refrigerator E02: not a dryer code. Bosch fridges use E02 for the icemaker

Bosch dryer repair across San Francisco

Tried the filter and the breaker already? Call (415) 851-9513, give the model number, and say that E02 survived both steps.

Plain language

What this code means

Bosch lists dryer E02 with E01 for a blocked fluff (lint) filter, and its US page also gives E02 a 30-second power reset at the breaker.

Ready to get your Bosch appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 851-9513 Book a Repair