Source: Bosch US Owner Support - Washer Error Codes
The pump of the intelligent dosing system is blocked. Clean the pump unit from standby, or turn i-DOS off for now.
Three codes, one problem. Bosch lists E:10-00, E:10-10 and E:10-20 together: the pump for the intelligent dosing system is blocked. On washers with i-DOS, that small pump draws detergent from a built-in reservoir and doses it into each wash automatically. When it jams, the washer flags it with one of these codes.
At a glance
| Code | E:10-00 / E:10-10 / E:10-20 |
|---|---|
| Appliance | Washer |
| What it means | The pump for the intelligent dosing (i-DOS) system is blocked. |
| First thing to try | Put the washer in standby. |
Clearing the dosing pump
- Put the washer in standby.
- Clean the pump unit. Bosch refers you to your owner’s manual for the detailed procedure for your model, so have it open while you work.
- Switch the washer back on.
- If the code returns, or the program will not start, Bosch says to book a technician.
Washing while you wait
Bosch notes that you can deactivate the intelligent dosing system manually until the problem is fixed. Your owner’s manual explains how for your model. With i-DOS off, add detergent by hand to the drawer as you would on a washer without automatic dosing, so laundry can carry on in the meantime.
FAQ
Do the three endings mean different faults?
Bosch does not say they do. It lists -00, -10 and -20 under one meaning and one fix.
Do I need a technician right away?
Not before cleaning the pump unit. Bosch only sends you to a technician if the code comes back after cleaning or the program will not start.
See also
- E33 / F33: foam from too much detergent, worth knowing if you switch to manual dosing.
- E:36-25 / E:38-25: a different pump, the drain pump, blocked.
i-DOS service for Bosch washers in San Francisco
If the dosing code keeps coming back after a clean, call (415) 851-9513. Tell us which of the three codes you see and that the pump unit has already been cleaned.