Skip to content
Error Code

Bosch Washer E:60-2B / H:32 Error Code

Source: Bosch US Owner Support - Washer Error Codes

Error code E:60-2B / H:32
Appliance Washer
Quick answer

Unevenly distributed laundry stopped the spin. Rearrange the load, mixing large and small items.

Open the door after E:60-2B or H:32 and you will usually find the laundry bunched to one side. Bosch gives both codes the same explanation: the laundry is unevenly distributed, which triggered the unbalanced-load detection system and stopped the spin cycle.

At a glance

Code E:60-2B / H:32
Appliance Washer
What it means The laundry is unevenly distributed, which triggered the unbalanced-load detection and interrupted the spin cycle.

Fix it in the drum

Bosch’s instruction is to redistribute the laundry in the drum. In practice:

  • Pull apart anything that has knotted together, such as sheets wrapped around smaller items.
  • Spread the pieces around the drum instead of leaving them in one lump.
  • Where possible, mix large and small items. Bosch notes that items of different sizes distribute themselves better during spin.

Then close the door and spin again.

Why one big item is the classic trigger

Bosch’s WAT28400UC manual describes the case where no spin takes place at all. Large items can become entangled in the drum so that the unbalanced-load system cannot spread them out, and the spin is canceled for safety. A single heavy bedspread or a rug-like bath mat on its own is hard to balance. Adding a few smaller pieces gives the washer something to even out the weight with.

If the whole washer shakes

A load that is merely uneven gives you the code. A washer that shudders as spin speed climbs, even with a good mix, is a separate issue in Bosch’s manual. Its checks are that the washer is level, that all four feet press equally on the floor, and that the transport bolts were taken out after delivery. Bolts left in can damage the machine during spin.

Similar codes

  • E32 / F32 / E:32: imbalance code on other displays, with tips on zippers and small loads.
  • E80: a drive-circuit fault, which is technician work, unlike a load that only needs rearranging.

Shaking or spin trouble? San Francisco Bosch service

If the washer still won’t spin balanced loads, call (415) 851-9513. Tell us whether it shakes at speed and whether the transport bolts were removed.

Plain language

What this code means

The laundry is unevenly distributed, which triggered the unbalanced-load detection and interrupted the spin cycle.

Ready to get your Bosch appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 851-9513 Book a Repair