Skip to content
Model Reference

Bosch SHV45M03UC Fully Integrated Panel-Ready Dishwasher

Cycles that stop early and wet dishes are the usual calls for this concealed-front integrated dishwasher with a delay timer.

Model number SHV45M03UC
Appliance category Dishwasher
About this model

Model overview

A concealed front lets this SHV45M03UC from Bosch match cabinetry in a San Francisco and Bay Area kitchen, while the interior still seats 14 place settings. The TallTub stainless interior, RackMatic upper-rack adjustment and AquaStop leak protection are the core features. InfoLight sends a running light onto the floor, and the four cycles come with two options. Note what the display showed when the trouble started. Copy the model number exactly as the rating label prints it, then add the symptom and any code to the request.

At a glance

Model SHV45M03UC
Appliance 24-inch fully integrated panel-ready dishwasher
Common symptoms dishes not getting clean or dry; water left in the tub after the cycle; door latch or control panel problems; cycle stops early or will not start
What you can check Note the cycle used, whether water is left in the tub, and any code or flashing light.
When to call a technician If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit.

Specifications

Capacity Holds 14 place settings.
Power Electrical rating is 120 V, 60 Hz, 12 A and 1,400 W.
Installation The catalog identifies SHV45M03UC as the fully integrated Integra 500 model.
Features Has four wash cycles and two options. RackMatic adjusts the upper rack even when it is loaded. AquaStop provides leak protection.
Controls InfoLight projects a running-status light onto the floor.
Finish The TallTub interior is stainless steel.

What sets the SHV45M03UC apart

The 19-hour delay timer is the feature that makes this model useful for evening loads, since the wash can be set to start after the kitchen has been cleaned. The taller interior holds oversized pots that would not fit a standard tub, and RackMatic lets the upper rack move even with dishes already loaded.

Service notes for the SHV45M03UC

Latch problems on a concealed-front model come down to the door hardware, and the technician looks at the switch and the control panel that sit behind the panel before anything else. Dishes that come out wet point to the drying stage, the spray arms and the way the racks are loaded. For water left in the tub, the drain pump, the filter and the AquaStop parts are inspected, starting with whichever shows a fault first. The owner can clear the filter, confirm the front panel is not pressing on the latch, and check the rack setting before loading. A useful note is whether InfoLight stayed lit and where the cycle ended.

The model number is printed on the rating label, usually on the edge of the door or the side of the tub, visible when the door is open; match it letter for letter before booking, because a single letter can change parts.

Frequently asked questions

Known problems

Common issues for this model

  • Dishes not getting clean or dry
  • Water left in the tub after the cycle
  • Door latch or control panel problems
  • Cycle stops early or will not start
Get it fixed

Recommended repair service

Helpful notes

Troubleshooting resources

Note the cycle used, whether water is left in the tub, and any code or flashing light.

Fix it right

Repair service

Ready to get your Bosch appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 851-9513 Book a Repair