Source: Bosch US Owner Support - Dishwasher Error Codes
The circuit that tells the control whether the door is shut has a fault. A 30-second breaker reset is Bosch's only owner step.
A door sensor circuit fault is what Bosch’s owner-support page lists for E06, E8000 and flashing Clean lights. Three different displays, one description.
At a glance
| Code | E06 / E8000 / Flashing Clean Lights |
|---|---|
| Appliance | Dishwasher |
| What it means | There is a fault in the door sensor circuit. |
| First thing to try | Switch the breaker for the dishwasher to off. |
Why the door has a sensor
The dishwasher needs to know the door is closed before it sprays water. A sensor at the door reports open or closed to the control, and the control will not run a cycle unless it gets the right signal. When the circuit carrying that signal faults, the dishwasher cannot confirm the door state and stops with this code.
Before you reset
Bosch does not list door checks for this code, and you shouldn’t take the door apart. It is still fair to notice a few things that are useful for whoever services it:
- Does the door close and latch the way it always has?
- Did the code appear when you closed the door, or mid-cycle?
The reset
- Switch the breaker for the dishwasher to off.
- Wait 30 seconds.
- Switch it on and close the door firmly.
- Start a cycle.
If the dishwasher runs normally, you are done. If E06 or the flashing Clean lights return, Bosch’s guidance is to book a technician.
Why this one goes to a technician
Reaching the sensor and the circuit behind it means taking panels off with the power disconnected. Sheet-metal edges inside a dishwasher are sharp, and the door is spring-loaded, so it is a job for someone who does it regularly.
Related Bosch codes
- Flashing Sanitized lights (E02): another light-only pattern, for a board relay fault.
- Flashing Active lights (E15): water in the base.
- E0110: electronics not communicating.
Door sensor repair on Bosch dishwashers in San Francisco
Call (415) 851-9513 if the reset didn’t hold. Tell us which display you see: E06, E8000 or the Clean lights.