Source: Bosch Home (Egypt) Washing machine error pages E16-F28
Bosch lists E20 without a stated cause and advises a reset. If it comes back, book a technician.
Bosch lists E20 (also shown as F20) among its washing machine error codes, but its explanation stops at one instruction: reset the machine. No cause or failed part is named. That is less satisfying than most code pages, but it is what the manufacturer publishes, and anything more specific would be guesswork.
At a glance
| Code | E20 / F20 |
|---|---|
| Appliance | Washer |
| What it means | A listed Bosch washer fault code for which Bosch states no cause and advises only resetting the machine. |
| When to call a technician | If it comes back, book a technician. |
How to reset properly
Turning the knob off and on is the first step, but Bosch’s US support page describes a fuller version for codes without their own entry:
- Switch the washer off, then on.
- Code still there? Unplug the machine, or switch off its circuit, for at least 30 seconds before restoring power.
- If it was a one-off, the display comes back clean and you can restart the program.
When resetting is not enough
A code that reappears after a full power-down is no longer a one-off. Bosch’s instruction at that point is to book a technician and give the exact error message. Since no cause is published for E20, there is nothing else an owner can safely test. Opening panels on a plugged-in washer is not an option.
Notes that help the visit
| Write down | Why it matters |
|---|---|
| Exact text on the display (E20 or F20) | Bosch asks for the exact message |
| Point in the cycle where it stopped | Narrows down which stage failed |
| Whether the 30-second power-down cleared it, and for how long | Separates a one-off from a repeating fault |
Other codes with no owner fix
- E80: drive-circuit fault that Bosch says only a technician can clear.
- E19 / F19: the neighboring code in Bosch’s list, for heating time exceeded.
Bosch washer service in SF for E20
Call (415) 851-9513 once the code returns after the 30-second reset. Read us the code exactly as displayed, along with the model number.