Source: Bosch Home (Egypt) Washing machine error pages E16-F28
The AquaStop leak protection has tripped. Turn off the water tap and have the washer checked.
E23 or F23 tells you the AquaStop on your Bosch washer has been activated. AquaStop is Bosch’s leak-protection system. Bosch describes the AquaStop safety device on the supply hose as containing an electric valve, and its job is to stop water from flowing in when the washer detects a leak.
At a glance
| Code | E23 / F23 |
|---|---|
| Appliance | Washer |
| What it means | The AquaStop system has been activated. |
Do this first
Turn off the water tap that feeds the washer. Bosch gives that same instruction for E:00-23, its newer-format code for water in the base or a leaking appliance, and it is the sensible first move here too. Then switch the washer off and unplug it, because water and mains power should not meet.
What you can safely look at
- Is there water on the floor under or around the washer? Wipe it up and note where it seems to come from.
- Are the supply hose joints at the tap and at the back of the machine dry?
- Is the AquaStop hose itself cracked or kinked?
Bosch’s warning about the AquaStop valve applies: never put that end of the hose in water.
Why this one goes to a technician
Bosch’s listing for E23 gives the meaning only, with no reset or owner fix. A tripped leak guard means water got somewhere it should not, and finding the source inside the cabinet involves removing panels on an electrical appliance. Keep the tap off until the washer has been checked.
Related water codes
- E:00-23: water in the base or the appliance leaking, in the newer display format.
- E17 / F17 / F29: blocked filters in the AquaStop hose, a supply problem rather than a leak.
Leak repair on Bosch washers in San Francisco
Leave the tap off and call (415) 851-9513. Tell us whether you saw water on the floor, and have the model number ready.